Two comfortable to sleep beds for children can be made yourself. All you need to. Wooden platforms, on which mattresses will lie, We attach between the added wall, and the side wall of the room. A small wooden ladder will also be needed to enter a higher bed. Let's also remember to mount the railing at the edge of the upper bed.
Sticking wallpapers on plates
Both paper and vinyl wallpapers can also be glued to walls made of wood-based boards or with unhopanized plasterboard. But important, to stick paper tapes or stripes at all contacts, made of glass mesh or plastic. These stripes should be about width 10 cm. We use the same glue to stick paper, we use to stick wallpapers. Mesh stripes are usually self -adhesive – covered on the bottom with a special glue.
Door finish
The old door of kitchen cabinets can be easily renovated by giving them a new decor made of natural wood. It is enough to stick narrow wooden boards with a thickness to the surface of the door or on both sides of other doors 5 mm and width around 5 cm. We use carpentry or two -component glue to stick – in the case of, when they are finished with laminate. Between the boards should be left a slot width equal to the diameter of a small nail. We press the board with carpentry for the time of gluing the board.
Roller boxes in the windows
In the YTong system, it is easy to install roller shutters in the lintels of door and window openings. In these ready -made elements, The rolled blinds are hidden from the outside, Also anti -burglary, protecting against theft, Blinds are also an additional thermal and acoustic insulation for the windows at night. They are mounted in the lintels under the ceiling. For that, where it is only possible, I advise you to mount blinds. The investment will pay back very quickly, even in lower heating costs.
Lighting bar
In a low -voltage lighting system, halogen lamps in handles are installed on a parallel running metal rods. They can be freely moved to the place we choose. Systems are most common, in which the barbells are distant from each other on 3 cm and attached to the wall at least two distance handles. The system can also be attached to the ceiling. At one of the ends of such an installation, it is necessary to install a transformer that reduces voltage from the network.
Bed in the closet
In small living rooms, we can predict a placed place to sleep at night, e.g.. For young children. Even a beginner DIY amateur can make a simple frame with a mattress, hidden after lifting to the vertical in a plate wardrobe attached to the wall. However, you must remember about good protection of the frame against accidental falling, and also attach the mattress to the frame with belts. This type of piece of furniture looks great in a larger shelves.
Wall and floor profiles
In the newly erected building, the wall and floor cladding tiles can break off the ground and crack. This is due to the movements of individual elements when the building is gradually settled. Before damaging these cladding and carpets, we can protect ourselves by installing appropriate compensatory wall and plastic wall profiles at the interface of the floor with the wall.. Thanks to the flexible inserts, they compensate for all stresses formed in both floor and wall layers.
Sleeping platform
Recently fashionable sleeping platforms can be built from veneered or laminated chipboard. Skeleton connected to the plate belts, set vertically, We cover with one large top screwed with screws. Platform structure, and above all, the skeleton should allow you to insert and extend the drawers for storing bedding. Such drawers must have rollers or rolling wheels attached to the bottom. A mattress available in stores is laid on a built platform.