The low -voltage link lighting system is installed under the ceiling at any height. Both links are unbuttoned and tightened between two side walls. After mounting, halogen lamp grips are tightened on the links. Lamps can be moved along the cables and set in selected places. In this system, as in any low -voltage, it is necessary in the transformer installation, which will change 220-230V to 12-24V, safe for the user even when you touch the cable.
Self -closing sliding door
Even a sliding door can be done in this way, that they will close automatically. All you need is a road rail, after which the prams are rolling, fastening, at a small angle. The road tilt angle is best selected experimentally. We initially attach the rail only on one side and changing the angle of its position relative to the level, We observe if the slightly pushed door will move in the position “”Closed”. Only after that we fix the other end.
Hole for foot in the bathtub
By housing the bathtub in a traditional way, That is, ceramic elements and finishing tiles with tiles. Putting the feet under the housing, in the hole, Facilitates the use of the bathtub without entering it, for example. while bathing a small child, manual washing, etc.. These types of holes should also be made in housings made of steel tin profiles covered with plasterboard and ceramic plates.
Compressing on the plate
When gluing various types of RAM, it is very important, with constant pressure, Pressing all four shoulders at the same time. This can be done in the plate instrument. In it, two neighboring storms are listed to two retaining blocks attached to the plate. The second two, on the other hand, and the remaining two resistance blocks. In the case of delicate frames, you need to think about the surfaces that protect the surfaces.
Skobel at the frame of the sheet metal
How to attach the lock staple to a typical metal frame, used in our apartments is as follows. We fix it with screws, scaled by specially made two -stage holes in the frame. These holes are first drilled with a diameter slightly larger than the dimension of the head, and then drank an oblong groove in it with a width larger than the fastening screw mandrel. By screwing the stomach, The screws are slid with heads in larger holes, and then moves under the groove.
Fasteners
Let's remember, that in a very rich assortment of all kinds of plastic and metal anchors and expansion pegs, there are many types of different applications. So I think it's worth knowing even the basic one. Standard anchors are the most commonly used, in which the object is attached to the ground, e.g.. wooden patch to the wall. But, When the need arises, you can use a distance anchor, in which the patch is very effectively attached to some distance from the wall.
Rod mounting
One of the ways to attach the rod: The use of metal sleeves between the two wooden walls. Such a case occurs, e.g., When we want to attach the gymnastic bar in the door frame. The sleeves are dried on the rod, slides into the drilled holes and clinic. You should also eliminate the longitudinal sliding of the stick itself, e.g.. Through two dowels scaled by the rod next to both sleeves. Sleeves equipped with collars should not move too loosely on the stick.
Pull switch
With great persistence, the manufacturers of standing lamps place the switch directly on the rope. As a result, To turn off the lamp, you need to dive on furniture or other equipment or reach for them. However, it is enough to mount a cheap and simple pulled switch on the lamp. We leave this factory on the cable, It will be pulled the second. We mount it on a metal, a small angle mounted under the bulb holder. Of course, the switch is connected in series to the electrical circuit existing in the lamp.
Switches in the apartment
Let's try to mount a home electrical installation, screw all switches in the same position, e.g.. not, To press the button down the light, light the light. After some time, we will get used to subconsciously press the button in the right way, without controlling whether we light or turn off the lighting. This is desirable, When the switch is located outside the room with door -full doors. Then you can't see if the room is illuminated.