Even in ordinary doors, it is worth using special brush profiles for built -in wardrobes with sliding doors. Screwed or glued to the bottom, the wings will seal the door contact, and also limit the escape of heat. Choosing a gasket in the store, Let's try to buy self -adhesive. It will make it easier for us to install it, Although you will still have to remove the door wing from the hinges. Let's remember about the periodic cleaning of the brush and accumulated dust.
Smoothing silicone putty
After covering the gaps with silicone, the surface should be thoroughly smoothed, giving it the right shape. Due to the viscosity of silicone, it is best to use soap wetted with water. In soap, one of the edges is worth shaping in the same way that the weld will have a smoothed. We drag the soap with a even movement, often soaking in water. Instead of soap, you can use freshly peeled potato. Kit with food is removed with food vinegar.
Frape filling with foam
Wide and deep gaps between the plates often occur in large -panel housing, from which walls and ceilings were made. They are particularly revealed with all wall repairs, after cutting the plaster. There are many ways to fill these gaps before the expected surface finish. The fastest and most effective is to use the assembly polyurethane foam. When it freezes, We cut her forehead with a sharp knife, and then we swallow with putty.
Color
Cutting the color in the corner between the wall and the ceiling when painting apartments, it is worth using a brush for radiators, who has a bent cap. It will be possible to set the bristles in this way, so as not to wade the ceiling with wall paint. In some cases, When the brush bristles are too long, they need to be cut with scissors to such a length, what a regular flat brush has for painting walls.
Priming wood
The first painting of raw wood resembles priming. If there is no original priming paint, you can prime with a surface paint diluted in a proportion from 1:5 do 1:10 (color – thinner). The more soft the wood, the more thinner. We start painting properly only after the primer dries completely and sanding the surface. Excellent results are obtained by priming heated throat.
Adjustable frames
Leading door manufacturers in Poland produce regulated frames for them. They allow for aesthetic and quick installation of the door in a wall with a thickness of 7,5 cm (This thickness is plastered with a plastered wall made of bricks arranged on the chop) up to several dozen centimeters. The width adjustment is enabled by the system of inserting individual elements in the inlets cut in the cooperating elements.