If free space remains between the hanging kitchen cabinets, It is worth building it with a tilted storage shelf, e.g.. pots of pots or other small items. Such a mini cabinet is attached to rotating stem -covered steps in the side walls of both neighboring cabinets. Of course, you also need to predict the appropriate closure that prevents her from accidental deviation.
Blameters on the cabinet door
Lingerie buckle, glued or bolted to the door of the cabinets from the inside, They will serve as attaching information on the card on the state of stocks in the cabinet. And above all, they should inform about the shelf life for food consumption. In the home workshop, they can inform about the type and place of storage of small assembly parts.
Picking the hole in the plate
Large holes in ceramic wall tiles traditionally break the special hammer. We crumble more pieces of material with his impacts. We support the tile on a heavy metal foundation, np. locksmith or heavy hammer. With the right frame in this way, we can knock out a hole of any diameter and shape without fear of cracking of the tile.
Correct combination
To properly nail one wooden element to the other, we must remember to maintain the principle, that the length of the nail must be at least three times larger than the thickness of the nailed element. If the thickness of the element, to which we nail it is smaller, It will be necessary to bend the nail on the bottom for the necessary strength of the connection.
Upholstery belt tensioner
To tighten the upholstery belts you will need a wooden block with stretched nails stuck in his forehead. The belt attached to them tightens by tilting the tensioner, based on the rear ends on the edge of the furniture. After tensioning the belt with one hand, The second equipped with a hammer must be immediately tilted with a few nails or upholstery pins.
Cabin with sliding doors
For the construction of a shower cabin, we can use a special sliding glass or acrylic door. The cabin should be placed in the corner of the bathroom and wall -up wall. This additional side wall is built. Before gluing the tiles, remember to seal with special preparations of all surfaces.
Storage of rolls and maps
Rulony Map, drawing cripples and graphic works to store the most conveniently storage by two loops from the string, hooks in the wall. Stored rolls inserted into both loops will not be lost, break or flatten. In the loops you can gather several rolls arranged one on top of the other.
Cutting the veneer
The most difficult to cut cross -edge stripes made of natural veneer. Inadequate cutting with both a knife, as well as the ball for veneer will cause fission. To prevent this, it is cut in this way. It involves placing the pad for the subject yes, to slightly bend the veneer belt on the edge.