In apartments, where pets stay, the problem is their hair on upholstered furniture. Removal of this hair can be easily carried out with a wide adhesive tape; We stick it into a small loop and after putting it on our hands, clean the upholstery by dragging the hand over the entire surface. With more pollution, we must reckon with the need to use more tape. This way you can clean various upholstered furniture from various impurities and dust.
The textile interior of the drawers
Drawers in many furniture can be pasted with a soft, a fluffy textile material, e.g.. Welume, but also e.g.. Irch. In such drawers we will store very fragile and valuable items, which could be quickly destroyed in wooden drawers. We glue the material in this way, that on the bottom of the drawer and sides inside we apply a layer of Wikol glue and leave on 10-15 min. for partial evaporation of water and the thickening of the adhesive. Then put the cut fabric and press it.
Tiffany stained glass windows
All kinds of stained glass windows are very decorative. We admire their beauty without realizing, that they are easy to do. Well, each measured and cropped slide is surrounded by a thin brass tape and then apply the solder to the edge of the tape. The seam formed from the solder will protect the slide against falling out of the tape. Then all the stained glass elements made in this way are already normally soldered with each other with a very thin layer of solder on both sides.
Universal key
The inconvenience of all ampoule keys is the need to put them in a bolt hole deeper into the hole. This is not possible, When the screw is in the cavity. Improving the key is to drink at the end of the ball. This will allow you to quickly screw or unscrew the screw at the oblique position of the key. Of course, the first and last turnover must be made with a shorter keyboard, which can be inserted into the cavity, and thus exert a larger torque.
Fastening
The construction of typical tin or wooden curtain rods does not allow lambrequin attachment in the same way as curtains and curtains. There is a lack of an additional rail with frogs for this decorative element. However, lambrekin can be easily suspended using double -sided adhesive tape. We glue it to the top, Curtain surface of the curtain rod and we glue the lambrequin formed earlier. In this way, we can suspend even heavy lambrexine made of thick materials.
Bottle base
From a piece of PVC floor covering, you can cut a comfortable and very practical base for a bottle or a vessel with ink, paint, itp. fluids. Attachment of the bottle prevents it from turning and pouring the content. I have been effectively using such a pad for many years with all kinds of work at the desk, especially for bottles with ink, which must be open all the time. The stand should have a diameter of about 8-10 cm.
Wrapping with canvas
Stare, Damaged kitchen cabinets can be renewed by sticking a thicker canvas, e.g.. linen and varnishing its surface with good quality colorless varnish. The varnish itself can also be a glue. First, however, the door must be covered with canvas. The canvas with modeling gum tightens on the bottom. His excess is cut only after the varnish has dried. We varnish the canvas on the front of the door and on the side edges.
Skin formation
The skin soaked in water or denaturation can be permanently shaped, np. in the canopy, On old leather football. You have to think about a good press in this position to dry. It's best to press the skin by wrapping it on the ball with a few turns of the string. Excellent results are obtained by pressing the skin by applying and strong mesh tension, even such, in which fruit is sold.