Both color paint, and varnish can be matted by adding talk to them. The matting degree will depend on the amount of talc, However, it must not be poured more than 10% the amount of paint. During painting, we must mix the content of the dish from time to time, because the Talk will be heavier than varnish or paint at the bottom of the dish. Let's remember, in order not to apply the paint in this way, Especially in internal corners.
Running pipes
With all kinds of repairs and alterations of water supply and central heating, the pipe can be conducted in the corners at the floor and hide accordingly. It is easiest to attach pipes with handles to existing plinths, and then obscure with a wooden compact or twisted trough from three slats. The trough can also be attached to the plinth. The cover itself needs to be carefully finished with varnish or glue the carpet strips to it, the same as the floor is covered.
Corner repair
We will get the equal and vertical edge of the repaired corner, If we apply a wooden board to the wall and, according to its edge, apply cement-lime or gypsum mortar with a putty. Then we smooth it with a trowel or sand it with sandpaper. If the plaster is reflected on both walls, It is after the place in one of them that we move the board to this wall and, according to her, we put off places on the other. Before putting down the wall, the wall should be wet with clean water.
Corner profiles
With thorough grounding at an angle 45 The steps of the edges of ceramic tiles laid in the outer corners can already be forgotten. A more durable and aesthetic finish of such a corner consists of special profiles also called slats. They are made of plastic or colored metals. These slats may have a rounded edge (quarter) or flat with a slightly rounded edge. It is important, to the size of the profile, that is, the rounding height should be selected to the thickness of the tile.