The cheapest, Of course, transport floor covering by your own car, np. on the roof trunk. To be a roll, Especially PVC floor coverings, did not break down, Let's put it on a regular ladder tied to the trunk. You can use a thicker and wider board or plate instead of a ladder. The liner roll must be carefully attached to 3-4 places. Let's move him too, so that it does not break down.
Paper template
When laying tiles or sheets of floor covering, it is often necessary to thoroughly reproduce the shape of the surface, e.g.. At the door frame. Its accurate reproduction can be obtained using a thin card of paper cut in thin strips. We apply it flat to the ground near the mapping shape and bend in the corner each narrow strip of paper. We get a exact template, from which the shape is easily redrawing to the floor covering.
Clamp pad
Kitchen appliances cannot be screwed for kitchen countertops finished with ceramic tiles, e.g.. manual meat grinding machine. The screw clamping clamp can cause a crack to crack with too much tightening. That is why it is worth sticking a small piece of hard wood aesthetically finished instead of a ceramic tile instead of a ceramic tile. At this point, we will be able to screw all the necessary devices without fear of damage to the entire countertop liner.
Non -laying protective foil
If the floor is covered with a carpet covered, Covering it with foil while painting the walls can lead to unpleasant slip. To protect yourself against it, Let's attach the edges of the foil with double -sided adhesive tape. We glue the tapes to the ground next to the walls. However, it is better to stick the tapes to a pedestal or floor strip and pull the foil to the wall. After painting, it will be easy to tear the foil, and then the tape itself.
A floor made of various materials
Very interesting aesthetic effects can be obtained by combining various floor materials. The most commonly used systems of ceramic floor tiles with pieces of carpets or wooden mosaics. When making this type of decoration, we must remember to accurately equate the surface of individual elements, as well as about the use of metal profiles protecting the edges of the elements.
Door sealing
If in the door closure line, Place the strap cut off from the shore under the carpet, We will get a low threshold that perfectly seals the bottom of the closed door. The sealing belt can be cut from another soft material, e.g.. polyurethane foam of the appropriate thickness. This belt is glued to the ground in the line of closed doors.
Cutting knife
When laying textile floor coverings, we use a special knife with replaceable cutting tiles. Each one is on the one hand equipped with a standard straight blade, on the other – in hook, facilitating cutting the liner along the warp. Let's remember, that in many assembly knives, Replacement of standard blades, Halls with hooks can adapt them for cutting textile or carpets.
Pulling the liner
A special tensioner is used for tensioning the textile and carpet floor coverings. Teeth, which its front part is equipped with a tensioner in the liner. It is stretched, pushing his knee into the back and helping yourself with your hand, which we hold this tool. Thanks to this, we can put a fairly large force that allows equal arrangement of the floor covering even with larger thicknesses and more stiff. Let's remember, that stretching begins from the inside of the room towards all side walls.