Sheet, np. laminate, You need to apply with contact with contact glue immediately in a designated place. After applying, it cannot be moved. It's best to base it on two thin slats, adjust, press the center of the sheet and then pull out the slats. For this purpose, you need to use modeling slats with a cross -section of 1×1 cm. Let's remember to place the slats then, when the glue layers both on the plate and the laminate manage to dry.
Killing floor panels
If laminated floor panels are used with a piece of cut off the panel, which we hit with a hammer, it is necessary to arrange this piece upwards up. This will protect against the destruction of the edge of the laminate when killing. When laying a laminate upwards, there may be damage to the edge of the panel itself. The damage will be small, But clearly visible on the edge of the laminate in the form of laminate dissolution.
Hanging cabinets
A very equal suspension on the wall of kitchen cabinets also decides about the aesthetics of the kitchen. And it is not that simple, When we hang each separately on hooks screwed into expansion pins anchored in the wall. We will hang them evenly by fastening on hooks screwed into a thicker board. This, in turn, must be attached to the wall, best 2-3 steel expansion anchors. Hooks in the board are easy to screw in to a strictly defined place, It is also easier to correct their location. We need to support the lower parts of the cabinets with such a suspension with a second board, the thickness of the same load -bearing.
Cutting veneer
All pruning of the veneer particularly thin brings the danger of its cracking along the jars. To avoid this, you can use a very sharp knife dragged very flat. However, it is better to use a special one, a small ball for cutting veneer. I cut it by moving the same, like a knife along a wooden, straight strip. The ball has very small, Sharp cutting teeth, nie rozchylone na boki. Instead of cutting ball, you can also use a knife with small teeth. Both tools should be very sharp.
Suspending curtains
Long curtains and curtains stretched on window curtain rods do not need to be removed with all kinds of work, e.g.. washing the glass, hinges and fittings adjustment or frame painting. It is enough if we hang a regular clothing hanger on the curtain rod and hang a curtain or curtain on it, that she lifts up as high as possible. In the same way, you can also suspend the curtain or curtain slid sideways. Such suspension can also be used, When we hang in the wet curtain rod, a shot.
Hanging the cabinet
Heavy cabinets, We must also hang on the wall in a different way to be placed with heavy objects. One of the ways is : screwing the cabinet with a trapezoidal cross -section to the back of the cabinet. Another trapezoidal strip is anchored to the wall. Fastening both slats should be strong and certain. The cabinet hangs, hooking both slats on each other. If we hang several cabinets within the wall, one should be mounted, long load -bearing strip, but with a sufficiently large cross -section.
Convenient pantograph
Pantograph mounted in all kinds of high wardrobes and wardrobes is very practical and convenient to use. Allows you to store clothes at a higher height, and thus more rationally use the space. The pantograph with suspended clothes is lowered to the level with a longer handle. In this position, you can easily remove or hang hangers with clothes, and then raise the pantograph to the upper position under the ceiling. In this position it is supported by the spring.