We get a strong connection when sticking the frame, Pasteing pieces of wood or plywood into the corners. We put these stickers into the gaps cut in it and smeared with glue. After dried the adhesive, the protruding parts of the sticker should be cut. For a strong connection of both parts of the frame we need to make a thickness cut 2-3 mm and the depth of at least half the length of the contact of both arms.
Simple image suspension
By nailing a single pendant to each picture hung on the wall, it is difficult to thoroughly measure such a pendant position, in which the image will hang evenly. That is why it is worth sticking or nailing a slice of a bottle cork in one of the frames of the frame on the bottom. Will create additional friction, and thus prevent the image suspended on the wall. In this way, we can eliminate even a very large tilting of a heavy image, But gluing two traffic jams in both lower corners.
Door renovation
Old damaged door of kitchen cabinets is easy to renovate. Just cut a large hole in them. A type of frame will be created, in which we bind nice, colorful and patterned glass. We frame it from the forehead with decorative profiled slats. You can also glue the rungs dividing the glass into smaller fields, By gaining an additional decorative element. I am also pleading with the glass from the back of the frame. The frame itself must also be finished, for example. Sticking the belts of veneer, staining and varnish.
Transporting a glass frame
When transporting mirrors and glass images. They will prevent glass to crack under the influence of vibrations. Even despite such protection, large items should be transported not flatly arranged, but set vertically on the edge and protected against falling. We always transport glass windows and doors in this way.