All kinds of countertops, Particularly larger dimensions glued even from the thinnest slats will be pursuing and packing. Therefore, at the bottom of each of them should be attached to at least two strips against waging. The slats are pasted into a combination of a swallow tail, that is, in the strip, this feather shape is cut out, and in the countertop. We slide the pen with a pen with glue and leave for gluing. It is best to use flexible adhesive for gluing, e.g.. wikol.
V -clamp
STRFS AND POOMS TREED ON THE WORKSHOP TABLE must be attached like this, so that the fasteners do not interfere with the processing of the entire surface. We can easily attach the board on the table in an easy and correct way, If we nail two parallel resistance blocks to his countertop, simple and with a wedge edge. Between them we place a board or a strip inserted into a specially cut wedge. Parallel forces to the axis of the boards formed during planing will cause a strong tightening of the board between the two nailed resistance blocks.
Hidden attachment
In the new series of its products, Sanitec Koło uses hidden mounting. They are used for standing toilet bowls, bidet and suspended semi -prostatucts. The ceramic body of the bowl slips on two plastic elements fastened with anchors to the ground. Then in the elements screwed through the holes in the ceramics fastening the whole. Screws with shattered pads are easy to screw in, because the fasteners have a number of small holes. After attaching the holes in the bowl of the bowl, you cover with plastic lids.
Universal screwdriver
If we cut the screwdriver with a hair saw and slightly tilt both parts, Such a blade will not slip even from a wider incision on the head of the screw. There will simply be more screws, to which the screwdriver will fit. The cut will not worsen the working conditions with a screwdriver. It should be made in this way, To divide sharp tools in relation 1:2. For proper operation, the blade should be properly tightened depending on the type of screwdriver and its purpose.
Widening the saw table
Even on a medium -sized stationary circular saw, it is difficult to cut standard chipboard or plywood – Big and heavy. The work will be facilitated by the support from the table top. We base the plates on them while cutting. With other works, they are easy to slide under the countertop. To make this type of support under the table top, short sections of the pipes are screwed and slides and extends the supports. These are also best made of thin -walled metal tubes.
Hidden nail
In connections of wooden elements, the aesthetic effect is often spoiled by visible nail heads. To hide the head of a small nail on solid wood. In place of the resulting cavity, we stick the nail, killing his head with a steel rod. Then we bend the feulture and stick permanently with wood adhesive. After this surfaces, we sand like this, so that the place of sticking the bustle does not differ from the neighboring surfaces.